Spec Series
Slim LED Strip

Spec Series Slim is a range of specification-level LED strip with a slim PCB width allowing for easy installation in narrow applications. An extremely narrow pitch offers “dot-free” lines of light* in ‘Richie Rail 18’ and our shallow profiles such as ‘Downhill Dan 10, ‘Tiny Tim 11’ and ‘Trim Tim 7’.

Features
  • No dots, even in our shallowest profiles.
  • Ideal for Downhill Dan 10, Tiny Tim 11, and Trim Tim 7 profiles.
Additional Information
  • 5-year warranty
  • CRI: 90+
  • R9: 50+
  • 3SDCM
  • PCB width: 6-8mm
  • Input voltage: 24V DC
  • Source life: L70 @ 50,000 hours
Spec Series Slim LED strip options
Code
Watts per metre
Colour temp.
Lumens per metre
LEDs per metre
Max. length per feed
Protection
SPEC-04-27-SLIM
SPEC-04-30-SLIM
SPEC-04-40-SLIM
4W
2700K
3000K
4000K
300
320
330
300
5M
IP20, IP65
SPEC-9.6-27-SLIM
SPEC-9.6-30-SLIM
SPEC-9.6-40-SLIM
9.6W
2700K
3000K
4000K
720
785
810
300
5M
IP20, IP65
SPEC-14-27-SLIM
SPEC-14-30-SLIM
SPEC-14-40-SLIM
14W
2700K
3000K
4000K
980
1050
1080
300
5M
IP20, IP65
SPEC-14-27-SLIM-280
SPEC-14-30-SLIM-280
SPEC-14-40-SLIM-280
14W
2700K
3000K
4000K
1260
1330
1400
280
5M
IP20
For IP65 versions, add “-IP65” to end of codes above. Example code: SPEC-9.6-30-SLIM-IP65.
IP65 versions reduce above stated lumen figures by 5%.
Wattage and lumen tolerance +/- 10% . Colour temperature tolerance +/- 5%.
* IP65 version is not “dot-free” in ‘Downhill Dan 10, ‘Tiny Tim 11’ or ‘Trim Tim 7’.

Please take particular care when selecting LED strips as not all options are available for all profiles.

Other LED strip options may be available upon request. Please consult profile data sheets on our website to check LED stripe compatibity with each profile.

All LED strip lumen values mentioned in the tables refer to source lumens (bare LED strip). Losses through diffuser/profile are not represented. Please consult photometric data for delivered lumen values.

Please note that for dimmable applications, our LED strips should be used with dimming controllers or drivers with a PWM frequency of 2000Hz or less in order to maintain warranty.